Dealer's Special - EVO192 PROMOKIT
07/24/13
Take advantage of this UNBEATABLE Dealer's Only Offer
Security Control Panel with onboard Access Control
EVO192 Panel can control up to 32 doors
Save TIME and MONEY
Call 877-879-2403 for details
ORDER TODAY
While Supplies Last - Offer may expire without notice
Kit includes:
(1) EV0192-F9T
(1) ACM12-G4N
(1) R910-P2C
(1) K641-N3Q
(1) IP150-P2C
(1) NEWACC-P2C
EVO-VHD in BETA
07/23/13
The Next Generation of Digiplex EVO
COMING SOON
EVO VHD is in Beta Testing
The new EVO VHD control panel is the next generation of the EVO panel.
It will provide all of the same functionality of the EVO192 but with increased power and faster upload/download capabilities.
Designed to accommodate future Paradox products, the EVO VHD features a built-in modem chip with faster speeds and additional panel capabilities.
IP and GPRS Communication for Paradox Panels - BETA
07/22/13
The recently introduced IP150 Internet Module has been upgraded (V1.20)
The recently introduced IP150 Internet Module has been upgraded (V1.20) to enable its serial output to connect directly to the PCS250/G Communication Module.
Interlinking the IP150, PCS250G or PCS250 will enable parallel alarm reports over IP/GPRS or GSM to a monitoring receiver (IPRS-7 or IPR512).
Simultaneously, all other events will be communicated through the IP150. The PCS250/G provides backup reporting, should reporting via IP150 fail for any reason.
This mode of operation is designed to reduce bandwidth consumption and save money for the end user.
In addition to the built-in landline support, the EBUS connection can be used to connect via VDMP3 or PCS250.
This new formation ensures 4-channel communication redundancy with IP, GPRS, GSM and landline.
With this new update, the end user can choose to receive email and/or SMS messages.
The recent upgrade resolves the issue of GPRS reporting and customers’ ability to connect via IP to iParadox.
Easy to install and very simple to program, it takes only a few minutes to install an IP150 to PCS250/PCS250G combination.
The IP150 currently supports sending emails in English, but it will support multiple languages in the near future.
The IP150 V1.20 upgrade enables broadcasting over 3 channels (see figures 1, 2 and 3) and allows you to integrate the IP150 with GPRS reporting for the purpose of using the iParadox application.
Figure 1. Configuration with IP, GPRS and VDMP3
Figure 2. Configuration with IP, GSM, GPRS and VDMP3
Figure 3. Alternate configuration with IP, GSM, GPRS and VDMP3
The IP150 V1.20 upgrade enables:
Broadcasting to up to 4 channels reporting:
IP and GPRS and VDMP3 through the EBUS (new).
IP and GSM and VDMP3 through the EBUS (new).
IP, GSM and VDMP3 on the PCS250 (like before).
VDMP3 can be connected via the EBUS to the Dialer or the PCS250
Enables customers to integrate the IP150 in combination with the iParadox application
To leverage the IP150 upgrade, the IPR512 and IPRS7 need to be upgraded as well.
All of these upgrades will be available in the coming weeks.
Redefining Security Detection with Paradox's New SeeTrue™ Technology
07/18/13
There is no compromise when protecting a home or business. Paradox introduces SeeTrue™, developed exclusively for the NVX80 motion detector. It utilizes advanced signal processing to significantly improve the detection response of dual-tech infrared and microwave beams. SeeTrue™ can detect at unprecedented performance levels, where most PIR detectors fail.
When placed indoors, the NVX80 in SeeTrue™ Secure (ST1) or Sterile (ST2) mode can detect intruders using cloaking methods such as using umbrellas, coats, cartons or similar materials and ensures comprehensive coverage in high temperature environments.
Both SeeTrue™ modes provide the highest level of false alarm protection.
Adding SeeTrue™ to the NVX80 arsenal was made possible due to the detectors sophisticated blend of active infrared, PIR and microwave anti-masking technologies.
NEW! BabyWare Beta for EVO Products Available in Wide Release
05/27/13
The new BabyWare V2.2 beta is now available in wide release for all installers and end-users to test and provide feedback.
This new beta corrects a number of issues in the last version and supports the new EVO192 and a number of other Paradox products.
What the New BabyWare Beta Supports
The latest versions of EVO192 panel including the EN50131 features
All MG/SP panel series including EN50131 features
All MG6250 panel versions including EN50131 features
All the latest modules like NVX80, NV780, IP150, PCS250G, TM50
The selection of the Alarm System Label Language in order to convert and display the panel labels correctly in EVO panels
BabyWare removes the burden of complex keypad programming by allowing you to configure settings and monitor system events from a single point of control. This innovative software simplifies operations and allows you to program all system parameters on-site or remotely.
Download the BabyWare Beta and provide your feedback by taking the BabyWare Beta Online Survey.
